Increase Generator Output by 10 Times or more

Please see my page on a Non-Ferrous Super Magnetic Alloy.
This is an excellent starting point for this new, much improved electrical generation technology. All current-generation technologies, except solar, rotate a coil-in-a-magnet or a magnet-in-a-coil to create a Magnetic Flux Field, billions of electrons, to induce current flow.
Let’s take this new non-ferrous magnetic alloy and apply it to an electrical generator. We will use this in the magnet-in-a-coil approach. But…this magnet is 33 times more powerful than normal magnets and when it is rotated in the coil, it will produce 33 times the electron or current flow. Yes, the amount of work required (torque from fuel) will go up to perhaps as much as 5 (500%) times, but the electrical output will increase as much as 33 times.
So…Now, let’s electrify this Non-Ferrous Super Magnet (making it into an Electro-Magnet). Instead of a 33 times increase in magnetic power, we could be getting as much as 1,000 times an increase in electrical power. Yes, the amount of work required to turn the stator/armature would increase, but the amount of power generated would be far more.
Ok. We have a way to generate 33 – 1000 more watts of power using a standard generator technology. How about improving that?
See my page on New Alloy to Create Coils without Copper Wrappings. Now, we are talking about improving our existing generator, not designing new ones. So… Think about the coil that the super magnet is rotating within. What if that coil was made of this new coil alloy and it was flat metal rolled into a sleeve (like a can on its side). Allow a slight air gap and put several more of these coil sleeves around the first coil; this is a description of nested coils around the spinning super magnet. The first new coil alloy sleeve will increase the amount of power being produced by at least 3 times; the coil alloy is more efficient. Each additional coil sleeve will increase the amount of power being produced by at least 10 times. It is reasonable to expect a generator with up to 5 nested coil sleeves and, perhaps, more. Each additional coil sleeve would multiply (not add) the amount of electricity being produced by a factor of 10 for each sleeve.
This seems to be an incredible approach to increasing the power of our tried and true electrical generators that have not changed much in more than 100 years. There’s more!!! Now, we can increase the amount of electricity being produced by electrifying the coil sleeves. Say this is only 10 times more each, but could be as much as 1000 times more.
Using this technology, generating electricity becomes much more efficient and lower cost. Instead of using gasoline, diesel, or natural gas to turn the stators/armatures, very high torque electric motors would be much more effective.
Using this technology, electric cars, trains, planes, ships, homes, offices, apartments, and factories would eliminate/replace all of the hydro-carbons being used now.

For the Military: Using this generation technology, more than enough electricity can be generated for use in directed energy weapons on ships/submarines, offensive radar sites, tanks/APCs, aircraft, and spacecraft and stations/bases.

7 Responses to Increase Generator Output by 10 Times or more

  1. Kevin Bruce Kieran Larson says:

    This is Amazing.

  2. Kevin Bruce Kieran Larson says:

    With this technology and 5 of your special coils, the output of any given generator can be multiplied by 15,000,000. In other words, a 4,000 watt portable generator would become powerful enough to generate 60 gigajoules per second. That’s enough to power 20 Iron Man suits simultaneously. And a 3,000,000 watt generator would supply more than enough energy to power all of New York City. That is if it uses 11,000 megawatt hours, everyday. But what do you think?

    • Merln says:

      Kevin, Yes. I’ve got several new and different technologies that can mixed and matched to enable great Break-Throughs. Yes. Isn’t it a great multiplyer? Too bad, I seem to still be being ignored. Hopefully, that will change in 2020.
      The new coil metal is one, but so is the room temperature super-conductor; it is another way to prevent heat (Ohm’s Law) when flowing current in a wire. But… there is always the option of flowing the current around the wire (a microwatt in). The Super-Conductor will also enable more electrical generation and a more effective electric motor; think electric jet engines. Actually, the Super-Conductor will be a multiplyer for any magnetic field effect in communications, data storage, data-memory writing/reading/overwriting(deleting), bus speeds. Quantum Computing also, but I call that 3D Computing; the current Quantum Computing efforts are, essentially, bullshit and will not go any further than the Optical Computers did. Lots of money for the same researchers that failed in Optical Computing. They just shifted over to “Quantum” – still the same people at the same universities and the same big companies and the same big government research grants.

  3. Kevin Bruce Kieran Larson says:

    Hi, Merln. If the magnet and all of its sleeves were totally electrified, then would the first sleeve multiply the output by 1,000 or only 3?

    • Merln says:

      Hey Kevin,
      We have already increased current production by 33, up to 1,000 times; a 40 KWatt generator would be producing 1,320 KW up to 40,000 KW (that is 40MW).
      Now, by electrifying the first coil sleeve, multiply that by 3 times and we get 4 up to 120 Megawatts (MW). Say the generator has 5 electrified coil sleeves. The next coil sleeve will take the amount of electrical current being produced up to 1.2 Gigawatts (GW) and each additional coil sleeve by up to 10 times more (12GW, 120GW, 1,200GW).
      This will not work with a standard gasoline generator; not enough torque. A 40KW diesel emergency generator that serves two houses, or a small compound, can be modified to generate enough electricity for a medium city. This is a major improvement in our electrical generating technology.
      I mentioned the torque, but must foot-stomp that, when this new coil sleeve approach is used for electrical motors, the torque is VASTLY increased. When you put a jet engine in afterburner (pumping water into it for increased density/thrust), that is a function of torque. Using this new electrical Very High Torque (VHT) motor is how I would get to an electrically powered jet engine. You can spin whatever nested compressor blades that you want with enough torque.
      The jet aircraft can use both coil sleeve generators and motors in tandum. Just imagine, a diesel locomotive train that can actually go uphill without momentum (the torque again).

      • Kevin Bruce Kieran Larson says:

        Thank you. I did some mathematics, and basically, a 500 watt generator, equipped with an electrified magnet and ten sleeves, can generator 1.5 Petawatts. The question would be is that enough power to destroy any kind of nuclear missile, mid-flight, when converted into a laser beam?

        • Merln says:

          Kevin, The militaries of the world are building laser systems in the less than Megawatt class that can take out an incoming warhead or explose the missile/rocket fuel. In Space, anything over 10 Megawatts would be able to badly damage any space ship that was not shielded appropriately. In our atmosphere, effective distances are limited by the “blooming” phenomina where the air around the laser beam heats up and interferes.

          Here’s another idea. Reread my New Physics stuff on additional fields that are created when power is put into a wire.
          Imagine a radio wave that can be pulsed (like a laser beam). Now imagine that it has kenetic properties. Now mix several frequencies together and you have a weapon system that can take out heavily armored vehicles/ships/tanks/aircrat/spacecraft with a few kilowatts of power. Think HF with its Ground Wave and Sky Wave and the abiliy to bounce it off the Ionesphere for great distances (at night). The Ham Radio types have software to predict this phenomina fairly accurately.
          Now, imagine a rifle or pistol that shot kinetic radio beams instead of bullets; now the soldier would just have to carry extra batteries (that is already the case). No noise, invisible (no red dot necessary), speed of “light” and unlimited (comparibly) ammunition.

          On you thought above, having more than 5 coil sleeves would take too much torque to crank it/turn it; that is the primary limitation on the new generator/motor.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.