Using Terahertz Transmitters to get to 6G and 7G

We are all being bombarded with the coming advent of 5G cellular data transmission systems; it is going to be much faster, more secure and we will be able to do many more things with it.
To give you an idea what they are talking about, we are using the 2.4 Gigahertz and 5 Gigahertz transmitters in our home routers; these are both safe for us to be around as long as they are a few feet away from us (primarily, our heads). This is why we should always use the speakerphone when we can.
So…5G will be 10 times faster than 4G and perhaps, as many as 50 times faster as the bugs/kinks get worked out. We are talking about 100 GHz to 500 GHz. The common description of these frequencies is what we call Ultrasound. These transmitters must be at least 10 feet away from our heads; any closer will be dangerous to us. If there is a transmitter next to/on your dwelling, move your bed or couch or change where your pillow is. As we get 5G routers, the same 10 feet distance rule will apply. This can be made much safer by using the correct wave forms. The Chinese 5G will make you sterile and make you blind through cataracts. Unfortunately, this is by design; we, in the west, are their enemies.
How are they making these Super High Frequency and higher, transmitters? They are making very specific alloys that vibrate at higher and higher frequencies and incorporating them in different layers on chips.
Anyone who is a little familiar with this site know that I specialize in new alloys to do different, useful things. I have also posted a page on how to make Terahertz Transmitters, but that was focused on a unique crystal structure. What most people do not realize is that all of our metals are crystal structures. These new alloys that are being developed for higher and higher frequencies are just man-made crystals.
What do I have in the way of transmitting higher frequencies? I have a different, less complex, more flexible way to make chips. It is easier, by design, to incorporate different layers of metal alloys/different materials and different physical shapes to make custom waveforms. There is no silicon in these chips. They are very rugged and resist degrading from heat. You can put DC Power (electricity) around the chip internal and external connections to eliminate heat from resistance (Ohm’s Law).
Using this approach, I can make transmitters that operate in the 10, 50, 100, 500 Terahertz range; that is 1,000 times faster than 5G. This is the 6G and 7G that President Trump is talking about.
The good news is that these new, Terahertz chips can be retrofitted into the 5G transmitters fairly inexpensively so the transition to 6 and 7G will be easy.
Another thought: The 5G technology will be built out using fiber to support the very high data speeds. Data speeds can be increased by 100 to 1,000 times by putting the data around the fiber as well as through it. Using this approach, these data rate increases can be extended to wireless data transmissions.